facebooktwitterlinkedin

Spa Covers

Replacement covers made to fit your spa!

When getting the measurements for your spa cover, you should measure from the outside dimension of the acrylic and add 1/4 inch per side for clearance. You can measure the existing cover if it fits properly.

Be sure to specify hinge length if your cover is not square. Example: 60″x84″ cover with a 60″ hinge would measure  60″x42″ when folded in half.

The taper is the thickness of foam you want, our covers come in different tapers, 3″-2″, 4″-2″, 4″-3″, 5″-3″ and 3″ flat.  Center of the cover tapering down to the edge to increase water run-off.

When choosing the foam density you have the choice of 1, 1.5 or 2lb foam. Price listed for most common choices.

For information on measuring the radius of your corners see the example below. Or you can simply trace your corner and bring it into the shop, we can measure it for you. The skirt length is the skirt that hangs below the foam.

SpaCovers_11.othr
 A. The distance between where the spa curves and the edge of the carpenters square is your radius.

B. The distance between the center of the circle to the edge of the spa is your radius.

Cover Colors

Specials

Map
541-485-6800

4065 W. 11th Ave #16
Eugene, OR 97402
(View Map)

Hours

Monday-Friday
9AM-5:30PM
Saturday
1PM-4PM